Apex Epoxy Perth installs industrial epoxy flooring for warehouses, workshops, factories, industrial garages and other high-use concrete floors across Perth. We mechanically prepare the slab, repair suitable concrete defects and install an epoxy resin system selected for the traffic, surface condition and operational requirements of the facility.
Our preparation-first process creates a sealed, durable and easier-to-maintain industrial floor, backed by a 5-year workmanship warranty.
Industrial epoxy flooring resurfaces prepared concrete where dusting, staining, surface wear and difficult maintenance are affecting the floor. In Perth warehouses, workshops and industrial garages, we assess the slab first, then match the grinding, repairs, coating build and surface texture to the way the area is actually used.
Industrial concrete floors benefit from epoxy coating because the resin seals the prepared slab and creates a defined wearing surface for traffic, cleaning and daily operations.
The required performance depends on the facility. A warehouse aisle, mechanical workshop and industrial garage do not expose a floor to the same conditions, so the substrate preparation and coating build should be selected accordingly.
The correct industrial epoxy system depends on the concrete condition, traffic, contamination, required texture, exposure and how quickly the area needs to return to service.
Apex does not treat every industrial floor as the same specification.
High-build industrial epoxy resin flooring creates a continuous coating system over mechanically prepared concrete. It is suited to internal industrial areas where the floor needs a sealed, hard-wearing surface that can handle regular foot traffic, trolleys, storage activity and routine cleaning.
The system can include concrete grinding, suitable repairs, primer and multiple resin layers. The required build is selected according to the substrate and expected use rather than applying the same specification to every floor.
Industrial garage floor epoxy is specified for concrete exposed to vehicles, tools, workshop activity and repeated traffic across concentrated wear areas.
Mechanical workshops and industrial garages place different stresses on a coating than general storage areas. Tyre movement, grit, oil contamination and repeated turning or parking occur in predictable zones, so preparation and coating selection need to account for how the floor is actually used.
The system can include epoxy base coats, full-flake broadcast and a compatible protective topcoat. Anti-slip texture can also be incorporated where additional grip is required.
An epoxy floor can be finished with a compatible polyaspartic topcoat where the project requires additional surface protection or UV stability.
This type of system is useful in industrial areas near roller doors, open bays and other locations where the coating may receive intermittent sunlight. The polyaspartic layer forms the final wearing surface over the prepared epoxy system rather than replacing the primer, base coat or substrate preparation underneath.
System compatibility, concrete condition and site exposure should all be assessed before the topcoat is selected.
1
We inspect the industrial concrete before specifying the flooring system. We assess existing coatings, cracks, joints, contamination, damaged areas, traffic conditions and how the facility operates. This establishes the preparation scope and coating requirements before work begins.
2
We mechanically grind suitable concrete to create a clean and properly prepared substrate for coating adhesion. Existing coatings and weak material are removed where required. Suitable cracks, joints and local defects are repaired, then grinding dust and loose contamination are removed before resin application.
3
We install the specified coating layers in the correct sequence over the prepared concrete. The build can include primer, epoxy base coats, selected colour or broadcast finish and a compatible protective topcoat. Anti-slip texture can also be incorporated where required.
4
We inspect the finished floor and provide the required return-to-service and maintenance information before handover. Cure requirements vary between coating systems and site conditions. Apex installation work is backed by our 5-year workmanship warranty.
Our project gallery shows how proper concrete preparation translates into a cleaner, more consistent finished epoxy floor. Each installation begins with slab assessment, mechanical grinding and suitable concrete repairs before the selected resin system is applied. Our industrial portfolio is still growing, so current examples also include completed residential floors that demonstrate the same preparation, coating application and finish standards used by Apex Epoxy Perth.
"We recently had our workshop floor done by Apex Epoxy Perth, and the difference is amazing. It looks clean, polished, and much more durable. The team paid attention to detail and delivered a perfect finish. Great team to work with."
"Really impressed with the whole experience. From the initial quote to the final result, everything was handled professionally. The price was fair, and there were no hidden surprises. The team worked efficiently and left the place spotless. Highly recommend them if you're thinking about epoxy flooring."
Apex Epoxy Perth approaches industrial flooring as a concrete preparation and coating system, not simply an application of resin over an existing slab.
Apex installation work is backed by a 5-year workmanship warranty. It provides clear accountability for the preparation and application completed by our team.
Coating adhesion begins with the substrate. We mechanically grind suitable concrete, remove weak material or existing coatings where required, and repair suitable cracks and defects before the epoxy system is installed.
We select coatings according to the floor rather than applying one standard build everywhere. Concrete condition, traffic, exposure, required finish and maintenance requirements help determine the appropriate epoxy and topcoat system.
Apex is a Perth-based team servicing Perth Metro and surrounding areas. Commercial clients deal with a dedicated flooring team from site assessment through to installation and handover.
These answers cover the main questions homeowners ask before choosing an epoxy floor installer in Perth, including preparation, installation time, concrete condition, pricing and warranty.
Industrial epoxy systems can be specified for areas exposed to forklift and material-handling traffic, but suitability depends on the actual operating conditions. Traffic frequency, wheel type, loads, turning areas, slab condition and coating build should be assessed before specification.
Many damaged concrete floors can be resurfaced after suitable preparation and repairs. We inspect cracks, joints, existing coatings and surface deterioration first. Significant structural movement may require separate assessment before a resin system is installed.
Oil-contaminated concrete must be assessed and prepared before epoxy is applied. Residual contamination can affect coating adhesion, so an existing workshop slab should not simply be covered with a new coating.
Yes. Anti-slip coating options are available for industrial floors where additional surface texture is required. The required texture should balance grip with cleaning and maintenance requirements.
Installation time depends on floor area, slab condition, repairs, coating build and curing requirements. We establish the work sequence and expected return-to-service schedule after inspecting the site.
Yes. Apex provides industrial garage and workshop epoxy flooring as part of its warehouse and workshop flooring services. We assess the slab, vehicle use, preparation requirements and required finish before recommending the coating system.
Apex Epoxy Perth provides a 5-year workmanship warranty on its installation work. The warranty supports the preparation and application completed by our flooring team.
Book a free site inspection for your industrial epoxy flooring project. Tell us about the floor area, existing coatings, cracks, contamination, traffic and how the facility is used. We will assess the concrete, explain the preparation required and recommend an epoxy system suited to your operational needs.
Request Your Free Quote
