Services

What We Do

Flooring services, done properly.

Six flooring systems, one standard of preparation. Whatever your space needs — from a two-car garage to a full industrial facility — we install it right the first time, with a written 5-year warranty behind it.

Floors installed across Perth
0 +
What We Install

Six systems. One standard.

Every service below gets the same preparation process — diamond grinding, moisture testing, and crack repair — before a single coat goes down. Pick the finish that suits your space.
Service 01

Epoxy Flooring

Bare garage concrete cracks, stains, and dulls faster than most owners expect — especially under Perth’s sun and daily vehicle use. Professional epoxy installation solves each issue permanently, in a single visit.
Service 02

Polished Concrete

Sleek, low-maintenance flooring with a smooth contemporary finish. Perfect for modern interiors, showrooms, and high-traffic commercial spaces where aesthetics matter as much as durability.

Service 03

Concrete Sealing

Protect your existing slab from stains, moisture, and wear while enhancing its natural appearance. The most cost-effective way to extend the life of concrete that’s still in good condition.

Service 04

Honed Concrete

A refined matte finish with natural stone-like texture. Increasingly popular in contemporary homes for a quiet, tactile look that complements modern architecture without the shine of polished concrete.
Service 05

Concrete Painting

An affordable way to refresh a tired, ageing floor. Improves appearance immediately and adds a protective layer against dust and minor wear — a smart option before deciding on a full resurface.

Service 06

Resin Flooring

Industrial-grade systems engineered for spaces that demand chemical resistance and heavy-duty performance — warehouses, factories, and commercial kitchens where standard coatings won’t hold up.

Where We Work

Epoxy flooring for every space

Same precision preparation, engineered for how each space actually gets used — from a two-car garage to a full production floor.

Garage Flooring

Oil and chemical resistant, easy to hose down, finished in a weekend.

Gym & Fitness Flooring

Impact-resistant surfaces built for dropped weights and heavy equipment.

Hospital & Healthcare

Seamless, hygienic surfaces with no grout lines for bacteria to hide in.

Kitchen & Food Prep

Non-porous flooring rated for grease, hot spills, and constant traffic.

Warehouse Flooring

Heavy-duty coatings for forklift traffic and round-the-clock operation.

Industrial Facilities

Chemical-resistant resin systems built for factories and processing plants.

How long does epoxy flooring last?

Lifespan comes down to two things more than any other factor: how the concrete was prepared and how thick the coating was built up for the job. Get both right and a properly installed epoxy floor will run 10 to 20 years under normal residential or commercial use. Skip the grinding stage, or apply a coating too thin for the traffic it carries, and even a quality resin can lift or wear through within a year. Every Apex Epoxy Perth installation carries a 5-year written workmanship warranty, covering the part of the job we control completely: preparation and application.

Both are resin systems applied over prepared concrete, but they behave differently once cured. Epoxy takes longer to cure, often a full day between coats, which gives it more build thickness and stronger impact resistance. That suits garages, workshops, and showroom floors that live indoors. Polyaspartic cures in hours rather than days and holds its colour under constant UV exposure, so it’s the system we reach for on driveways, alfrescos, and pool surrounds sitting in direct Perth sun most of the day. We specify the system to the location, not the other way around.
A residential garage, alfresco, or driveway typically takes 2 to 3 days from grinding through to a cured topcoat. Commercial and industrial floors run longer, usually 3 to 5 days, depending on the square metreage and how many coats the traffic level requires. The exact figure comes from your free site inspection, once we’ve seen the concrete and know what it needs.
In most cases, yes, and replacing the slab is rarely necessary. We diamond-grind the surface to remove the top layer and open the concrete up, repair cracks and joints with a high-strength filler, and prime with a product designed to bond to prepared, older concrete. Hairline cracking and general wear are exactly what that preparation stage is built to handle. Structural movement in the slab is the one thing worth flagging early, since that needs its own repair before any coating goes down.
Standard epoxy can amber over time under constant UV, and that’s a genuine limitation of the resin itself, not a myth. It’s why we finish sun-exposed areas with a UV-stable topcoat, or specify a polyaspartic system outright for driveways and alfrescos that get direct sun for most of the day. A floor that starts yellowing within a year or two is usually a sign the wrong topcoat was used for the location, not that epoxy itself was the wrong choice.
On its own, a smooth epoxy topcoat can be slippery when wet, which matters for pool surrounds, alfrescos, and commercial kitchens. We build slip resistance into the final coat with a broadcast aggregate or a textured additive, matched to how much grip the space actually needs. Done properly, that adds traction without making the floor rough or harder to clean, which is the trade-off cheaper anti-slip additives often get wrong.
Less than most people expect. Regular sweeping to keep grit from scratching the surface, plus an occasional mop with warm water and a mild detergent, is enough for most floors. Avoid ammonia-based or highly acidic cleaners, which dull the topcoat with repeated use, and deal with oil, fuel, or chemical spills as they happen rather than leaving them to sit.
Yes. Every installation, residential or commercial, is backed by a 5-year workmanship warranty in writing, not a verbal assurance at handover.
The full Perth metro area, from Joondalup in the north to Rockingham in the south, and Fremantle through to Mandurah and Ellenbrook. If your suburb isn’t on the list below, contact us directly, since coverage often extends beyond what’s listed.
FAQ

Common
questions answered.

Can’t find what you’re looking for? Call us — we’re happy to talk through your project before you commit to anything.

Get Started

Ready to transform
your floors?

A cracked, dusty, or stained floor doesn’t fix itself, and putting the decision off just means living with it a while longer. Getting in touch costs nothing. Tell us about your space and we’ll come back with a straight answer on cost, not a sales script.

Request Your Free Quote